Emblem/Nameplate Replacement - Front Fender

Emblem/Nameplate Replacement - Front Fender

Removal Procedure

1. Remove the front wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front (Service and Repair).




2. Remove the nut from the emblem by reaching through wheel opening.
3. Remove the emblem from the fender.

Installation Procedure




1. Position the emblem to the fender.

Notice: Refer to Fastener Notice .

2. Install the emblem nut by reaching behind the wheel liner.

Tighten the nut to 1 Nm (9 lb in).

3. Install the front wheelhouse liner. Refer to Wheelhouse Liner Replacement - Front (Service and Repair).