Transmission Mount Replacement - Rear

Transmission Mount Replacement - Rear

Removal Procedure
1. Raise the vehicle.





2. Remove the transmission mount-to-bracket through bolt (1).
3. Remove the transmission mount-to-frame bolts (4).
4. Remove the transmission mount (3) from the vehicle.





5. Remove the transmission mount bracket bolts (1, 3, 4).
6. Remove the transmission mount bracket (2).

Installation Procedure





1. Install the transmission mount bracket (2).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the transmission mount bracket bolts (1, 3, 4).
^ Tighten the bolts to 55 Nm (41 ft. lbs.).





3. Install the transmission mount (2) to the vehicle.
4. Install the transmission mount-to-frame bolts (4).
^ Tighten the bolts to 50 Nm (37 ft. lbs.).
5. Install the transmission mount-to-bracket through bolt (1), while aligning the transmission mount to the bracket.
^ Tighten the bolt to 110 Nm (81 ft. lbs.).
6. Lower the vehicle.