Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Timing Cover: Service and Repair



Engine Front Cover Replacement

Removal Procedure




1. Drain the cooling system.
2. Remove the drive belt tensioner.
3. Remove the oil pan.
4. Remove the crankshaft balancer.
5. Remove the crankshaft position actuator magnet.
6. Remove the thermostat housing.
7. Remove the water pump.
8. Remove the engine front cover bolts (1).
9. Remove the engine front cover.
10. Remove the engine front cover gasket.

Installation Procedure




1. Install the engine front cover gasket.
2. Install the engine front cover.
3. Apply sealant to the bolts in the locations pointed out (1) in the graphic. Refer to Sealers, Adhesives, and Lubricants.

Notice: Refer to Fastener Notice.

4. Install the engine front cover bolts.

Tighten the bolts to 25 N.m (18 lb ft).

5. Install the water pump.
6. Install the thermostat housing.
7. Install the crankshaft position actuator magnet.
8. Install the crankshaft balancer.
9. Install the oil pan.
11. Fill the cooling system.