Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Cleaner Housing: Service and Repair



Air Cleaner Assembly Replacement

Removal Procedure




1. Remove the air cleaner outlet duct.
2. Disconnect the engine wiring harness electrical connector (1) from the mass airflow (MAF)/intake air temperature (IAT) sensor.




3. Remove the air cleaner housing rear bolt.
4. Reposition the air conditioning (A/C) condenser and evaporator tube clamp as required.




5. Remove the air cleaner assembly from the upper tie bar.

Installation Procedure




1. Install the air cleaner assembly to the upper tie bar.




2. Position the A/C condenser and evaporator tube clamp as required.

Notice: Refer to Fastener Notice.

3. Install the air cleaner housing rear bolt.

Tighten the bolt to 10 N.m (89 lb in).




4. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.
5. Install the air cleaner outlet duct.