Hood: Service and Repair

Hood Replacement

Removal Procedure






Notice: When removing body panels, apply tape to corners of panel and adjacent surfaces to help prevent paint damage.

1. Open and support the hood.
2. Install a protective covering over the fenders.
3. Remove the hood insulator, if equipped.
4. Mark the upper hood hinge location to the hood with a grease pencil.
5. With an assistant, remove the hood hinge to hood bolts.
6. With an assistant, remove the hood.

Installation Procedure




1. With an assistant, position the hood to the hinges.
2. Align the hood hinges to the alignment marks on the hood.

Notice: Refer to Fastener Notice in Service Precautions.

3. Install the bolts that secure the hinge to the hood.

Tighten the bolts to 10 N.m (89 lb in).

4. Install the hood insulator, if equipped.
5. Adjust the hood. Refer to Hood Adjustment.
6. Remove the protective covering from the fenders.
7. Remove the support and close the hood.