Bosch Connectors (2.8 JPT)

Bosch Connectors (2.8 JPT)

Tools Required

J 44020 Terminal Repair Kit

Terminal Removal Procedure

1. Pull out the slider on the connector position assurance (CPA) until it is at the end of its travel.
2. Disconnect the connector from the component.
3. Remove the wire dress cover if necessary.
4. Push the wire side of the terminal that is being removed toward the connector and hold it in position.




5. Insert the J 42019 (12122378) into the 2 cavities on each side of the terminal at the front of the connector and push until you feel the tool disengage the terminal retainers.
6. Carefully pull the terminal out of the connector. Always remember never use force when pulling a terminal out of a connector. If the terminal is difficult to remove, repeat the entire procedure.

Terminal Repair Procedure

Use the appropriate wire assembly repair kits available through Saturn Service Parts.