Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Limited Slip Differential Assemble



Limited Slip Differential Assemble

Tools Required

J 42162 Getrag Axle Side Gear Compressor




1. Install a beveled washer (108) on the axle side gear with bevel facing out.




2. Install a thick pressure plate (109) with friction material facing away from the gear teeth.





Important: Friction discs and separator plates develop specific wear patterns. During disc and plate installation, keep the components in the order in which they were removed.

3. Install the steel plate against friction material of the pressure plate. Alternate the installation of steel plates and friction discs. Ensure that the last steel plate of the clutch pack (110) is against the case half.
4. Repeat steps 1 through 3 for the other side.




5. Install the assembled axle side gear (107) into the right case half (105).
6. Align tabs on the steel plates to fit the grooves.




7. Install the assembled axle side gear (107) into the left case half (104).
8. Align tabs on the steel plates to fit the grooves.




9. Using J 42162 and a press, apply light pressure on the pinion gears and washers so they align with the pinion differential shaft bores.
10. Install the differential shaft (103) ensuring that it moves through the washers and gears properly.




11. Align bolt holes between the halves and lightly press them together.