Oil Pick Up/Strainer: Service and Repair

Oil Pump Suction Pipe and Screen Assembly Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Drain the engine oil.




3. Remove the oil pan.




4. Remove the oil pipe bolts.
5. Remove the oil pipe screen assembly.
6. Remove the oil pipe O-ring. Discard.
7. Clean the gasket surfaces.

Installation Procedure




1. Install a NEW oil pump pipe O-ring.
2. Install the oil pipe screen assembly.

Notice: Refer to Fastener Notice.

3. Install the oil pump pipe bolts.

Tighten the bolts to 12 N.m (106 lb in).




4. Install the oil pan.
5. Lower the vehicle.
6. Refill the engine with 4.73 L (5 qt) of oil.
7. Start the vehicle and inspect for leaks and correct oil pressure.