68. Oil Pan Installation

Oil Pan Installation




1. Clean and dry the oil pan mating surfaces.
2. Apply sealant GM P/N 12346240 (Canadian P/N 10953493), or equivalent, evenly to the oil pan mating surface (1) of the engine block.




3. Install the pins (402).
4. Install the oil pan (400).

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the bolts (409).




6. Tighten the bolts.

1. Tighten the bolts in sequence a first pass to 6 N.m (53 lb in).
2. Tighten the bolts in sequence a final pass to 12 N.m (106 lb in).