Instrument Panel Outer Air Outlet Upper Duct Replacement - Left Side

Instrument Panel Outer Air Outlet Upper Duct Replacement - Left Side

Removal Procedure




1. Remove the instrument panel upper trim panel.
2. Remove the LH air outlet duct screws from the instrument panel retainer.




3. Remove the LH air outlet duct from the instrument panel retainer.

Installation Procedure




1. Inspect the seals and replace if damaged using Kent Industries adhesive backed foam tape P/N 46485 (or equivalent).
2. Install the LH air outlet duct to the instrument panel retainer.






Notice: Refer to Fastener Notice.

3. Install the LH air outlet duct screws to the instrument panel retainer.

Tighten the screws to 1 N.m (9 lb in).

4. Install the instrument panel upper trim panel.