Blower Motor Impeller: Service and Repair

Blower Motor Impeller Replacement

Removal Procedure




1. Remove the right side insulator/closeout panel.
2. Disconnect the electrical connector from the blower motor.
3. Remove the blower motor screws from the HVAC module.
4. Remove the blower motor from the HVAC module.




5. Remove the blower motor impeller retention clip (1) from the blower motor shaft (2).




6. Remove the blower motor impeller (1) from the blower motor (2).

Installation Procedure




1. Install the blower motor impeller (1) to the blower motor (2).




2. Install the blower motor impeller retention clip (1) to the blower motor shaft (2).




3. Install the blower motor to the HVAC module.

Notice: Refer to Fastener Notice.

4. Install the blower motor screws to the HVAC module.

Tighten the screws to 1 N.m (9 lb in).

5. Connect the electrical connector to the blower motor.
6. Install the right side insulator/closeout panel.