Child Restraint Tether Anchor Replacement (Early Production)

Child Restraint Tether Anchor Replacement (Early Production)

Removal Procedure




1. Fold down the rear seat back.
2. Remove the tether anchor escutcheon by pulling up at the sides.




3. Remove the tether anchor fastener and remove the tether anchor.

Installation Procedure




1. Position the tether anchor onto the rear seat structure.

Notice: Refer to Fastener Notice.

Important: Verify that the tether anchor tab is inserted into the notch.

2. Install the tether anchor fastener.

Tighten the fastener to 25 N.m (18 lb ft).




3. Install the tether anchor escutcheon.