Seat Belt Height Adjuster: Service and Repair

Seat Belt Height Adjuster Replacement - Front

Removal Procedure

1. Remove the center pillar upper garnish molding.




2. Remove the fasteners from the shoulder belt height adjuster. Remove the height adjuster.

Installation Procedure






Notice: Refer to Fastener Notice.

Important: Apply Permatex(R) 24200 on all restraint fasteners prior to installation.

1. Install the shoulder belt height adjuster with the fasteners.

Tighten the fasteners to 40 N.m (30 lb ft).

2. Install the center pillar upper garnish molding.
3. Operate the shoulder belt to ensure proper installation.