Rear Wheel Speed Sensor Replacement

Rear Wheel Speed Sensor Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake shoes.
4. Disconnect the wheel speed sensor electrical connector.




5. Remove the wheel speed sensor bolt.
6. Remove the wheel speed sensor through the drum brake backing plate.

Installation Procedure




1. Install the wheel speed sensor through the drum brake backing plate to the wheel bearing/hub assembly.
2. Seat the wheel speed sensor harness grommet into the backing plate.

Notice: Refer to Fastener Notice.

3. Install the wheel speed sensor mounting bolt.

Tighten the bolt to 8 N.m (71 lb in).




4. Connect the wheel speed sensor electrical connector.
5. Install the brake shoes.
6. Install the tire and wheel assembly.
7. Lower the vehicle.