System Specifications

Disc Brake Component Specifications
Brake Rotor Diameter 296.00 mm (11.654 in)
Rotor Minimum Thickness* 24.5 mm (0.960 in)
Brake Rotor Maximum Allowable Assembled Lateral Runout 0.06 mm (0.002 in)
Brake Rotor Maximum Allowable Scoring 1.50 mm (0.059 in)
Brake Rotor Maximum Allowable Thickness Variation 0.025 mm (0.001 in)
Brake Rotor Thickness - New 26.0 mm (1.024 in)
* All brake rotors have a minimum thickness dimension cast into them. Replace any rotor that is worn or machined below this specification.

Drum Brake Component Specifications
Brake Drum Diameter - New 250.0 mm (9.84 in)
Brake Drum Discard Diameter 251.5 mm (9.90 in)
Brake Drum Maximum Allowable Radial Runout 0.03 mm (0.001 in)
Brake Drum Maximum Allowable Scoring 1.5 mm (0.059 in)
Brake Drum Maximum Diameter After Refinish 251.5 mm (9.90 in)