Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2007 >> VUE AWD V6-3.5L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 5AT - Automatic Transaxle >> Assemble, Disassemble, and Installation >> Wiring Harness Installation

Wiring Harness Installation



Wiring Harness Installation




1. Install an automatic transmission wiring harness O-ring seal (3) on the automatic transmission wiring harness (2) and route the wiring harness through the transmission case housing bore.




2. Connect the green wire harness connector to the B shift solenoid valve (470).
3. Connect the yellow wire harness connector to the TCC solenoid valve (468).
4. Connect the red wire harness connector to the A shift solenoid valve (466).
5. Connect the orange wire harness connector to the C shift solenoid valve (465).





Notice: Refer to Fastener Notice in Service Precautions.

6. Install the transmission wiring harness assembly (2).
7. Install the transmission wiring harness M6 x 1.0 x 20 mm bolt (1).

Tighten the bolt to 12 N.m (106 lb in).

pro multis · About Operation CHARM