Front Side Door Window Replacement

Front Side Door Window Replacement

Removal Procedure




1. Remove the inner front door trim panel.
2. Remove the front door water deflector.
3. Lower window to access window bolts.
4. Remove the window bolts.
5. Pull the window out of the window regulator guide plate.
6. Slide the window down and out of the primary glass run channels.
7. Remove the window by tilting outboard and pulling the window out of the door through the door belt opening.

Installation Procedure




1. Install the window by sliding the window into the door through the outside door belt opening.
2. Install the window into the primary glass run channels and rest the window on the regulator guide plate.

Notice: Refer to Fastener Notice.

3. Install the window bolts.

Tighten the bolts to 10 N.m (89 lb in).

4. Install the front door water deflector.
5. Install the front inner door trim panel.
6. Operate the window to inspect the operation.