Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2007 >> VUE FWD L4-2.2L >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Lumbar Support Actuator Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Lumbar Support Actuator Replacement



Lumbar Support Actuator Replacement

Removal Procedure

1. Remove the front seat. Refer to Front Seat Replacement - Bucket .




2. Remove the lumbar cable from the actuator:

1. Adjust the knob until the lumbar basket is in the position of least support.
2. Pull back on the lumbar cable sleeve.
3. Remove the barrel end of the cable from the lumbar actuator.

3. Remove the lumbar knob by pulling firmly on the knob.




4. Drill out the rivets from the lumbar actuator, if necessary.
5. Remove the lumbar actuator screws.
6. Remove the actuator from the seat.



Installation Procedure






Notice: Refer to Fastener Notice .

1. Install the lumbar actuator to the seat cushion frame with screws.

Tighten the screws to 2 N.m (18 lb in).





2. Install the lumbar knob.
3. Install the lumbar cable in the actuator:

1. Pull back on the lumbar cable sleeve.
2. Install the barrel end of the cable from the lumbar actuator.
3. Adjust the knob to ensure that the cable is properly installed.

4. Install the front seat. Refer to Front Seat Replacement - Bucket .


pro multis · About Operation CHARM