Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Wheel Speed Sensor Replacement



Rear Wheel Speed Sensor Replacement

Removal Procedure




1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake shoes.
4. Disconnect the wheel speed sensor electrical connector.




5. Remove the wheel speed sensor bolt.
6. Remove the wheel speed sensor through the drum brake backing plate.

Installation Procedure




1. Install the wheel speed sensor through the drum brake backing plate to the wheel bearing/hub assembly.
2. Seat the wheel speed sensor harness grommet into the backing plate.

Notice: Refer to Fastener Notice.

3. Install the wheel speed sensor mounting bolt.

Tighten the bolt to 8 N.m (71 lb in).




4. Connect the wheel speed sensor electrical connector.
5. Install the brake shoes.
6. Install the tire and wheel assembly.
7. Lower the vehicle.