Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Blower Motor Resistor: Service and Repair



Blower Motor Resistor Replacement

Removal Procedure




1. Remove the right side insulator/closeout panel.
2. Disconnect the electrical connector from the blower motor resistor.




3. Remove the blower motor resistor screws from the HVAC module.
4. Remove the blower motor resistor from the HVAC module.

Installation Procedure




1. Install the blower motor resistor to the HVAC module.

Notice: Refer to Fastener Notice.

2. Install the blower motor resistor screws to the HVAC module.

Tighten the screws to 1 N.m (9 lb in).

3. Connect the electrical connector to the blower motor resistor.
4. Install the right side insulator/closeout panel.