License Plate Lamp: Service and Repair

Rear License Lamp Replacement

Removal Procedure

1. Remove the liftgate interior trim panel.




2. Disconnect the license lamp electrical connector.
3. Remove the license lamp bezel to liftgate nuts.
4. Remove the license bezel housing from the vehicle.

Installation Procedure




1. Position the license lamp bezel on the liftgate.

Notice: Refer to Fastener Notice.

2. Install the license lamp bezel to lift gate nuts.

Tighten the nuts to 4 N.m (35 lb in).

3. Connect the license lamp electrical connector.
4. Install the liftgate interior trim panel.