Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2007 >> VUE FWD L4-2.2L >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Speed Sensor >> Service and Repair >> Output Speed Sensor Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Output Speed Sensor Replacement



Output Speed Sensor Replacement

Removal Procedure

1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Disconnect the wiring harness from the output speed sensor.





Important: Do not damage the output speed sensor or transaxle case.

3. Remove the output speed sensor bolt/screw.
4. Remove the output shaft speed sensor and the O-ring.

Installation Procedure




1. Apply automatic transmission fluid to the new output speed sensor O-ring seal.
2. Install the new output speed sensor O-ring seal onto the output speed sensor.
3. Install the output speed sensor into the transmission case assembly.

Notice: Refer to Fastener Notice.

4. Install the output speed sensor bolt.

Tighten the bolt to 12 N.m (106 lb in).

5. Connect the wiring harness to the output speed sensor.
6. Lower the vehicle.

pro multis · About Operation CHARM