Differential Axle Housing: Service and Repair

Differential Housing Support Bushing Replacement

Tools Required

J 44866 Support Bushing Remover/Installer





Important: Remove the bushing only if damaged or worn out.

Important: Use the high pressure lube supplied with the tool.

1. Install J 44866. Tighten the nuts in order to force out the bushing.





Important: The bushing has 2 slots molded into the rubber section. The slots are used to control vibration and must be installed in the following positions:

* 4-Cylinder Vehicles - Align the slots in the 3 o'clock and 9 o'clock position (2).

* 6-Cylinder Vehicles - Align the slots in the 6 o'clock and 12 o'clock position (1).

Install J 44866. Tighten the nuts in order to force the bushing in.