Rear Window Wiper Arm Replacement

Rear Window Wiper Arm Replacement

Removal Procedure




1. Remove the rear wiper arm finish cap to expose the wiper arm nut.
2. Remove the rear wiper arm nut.
3. Lift the rear wiper arm assembly away from the rear window and remove the wiper arm from the pivot shaft.

Installation Procedure




1. Position wiper blade assembly on the first rear window defogger grid line above the blackout strip as shown in the illustration.

Notice: Refer to Fastener Notice.

2. Install the rear wiper arm nut.

Tighten the nut to 27 N.m (20 lb ft).

3. Install the rear wiper arm finish cap.
4. Operate the windshield wipers and inspect for proper operation.