Center Pillar Auxiliary Weatherstrip Replacement

Center Pillar Auxiliary Weatherstrip Replacement

Removal Procedure





1. Remove the center pillar auxiliary weatherstrip by pulling the weatherstrip down and away from vehicle.
2. Use a clean rag and 3M General Purpose Adhesive Cleaner 08984 or the equivalent in order to wipe any remaining adhesive from the center pillar.



Installation Procedure





1. Clean the area where the weatherstrip will be installed.
Use a lint free cloth and Varnish Makers and Painters (VMP) naphtha or a 50/50 mixture by volume of isopropyl alcohol and water to clean the area.
2. Remove the tape from the weatherstrip to expose the adhesive.
3. Install the center pillar auxiliary weatherstrip to the vehicle.