Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Programming and Relearning
Actuators Recalibration
Calibration Procedure at the HVAC Control Head
Use the following steps to perform the calibration update:
1. Ignition in ON position or engine running.
2. Simultaneously press the A/C and recirculation buttons on control head 3 times in less than 2 seconds.
3. The Mode setting lights will flash during calibration and will quit flashing once calibration is completed.
4. This calibration process can take up to 30 seconds.