Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2007 >> VUE FWD L4-2.4L Hybrid >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Service and Repair



Accelerator Pedal Position Sensor Replacement

Removal Procedure




1. Disconnect the instrument panel wiring harness electrical connector from the accelerator pedal position (APP) sensor.






Important: Due to clearance issues, the upper bolt cannot be removed from the sensor. Loosen the bolt and leave the bolt in the sensor until the sensor is removed.

2. Remove the APP sensor bolt.
3. Remove the APP sensor.

Installation Procedure




1. Install the APP sensor.

Notice: Refer to Fastener Notice.

2. Install the APP sensor bolt.

Tighten the bolts to 25 N.m (18 lb ft).




3. Connect the instrument panel wiring harness electrical connector to the APP sensor.

pro multis · About Operation CHARM