Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously

Air Flow Meter/Sensor: Service and Repair

Mass Airflow Sensor/Intake Air Temperature Sensor Replacement

Removal Procedure

1. Disconnect the engine wiring harness electrical connector (1) from the mass air flow (MAF)/intake air temperature (IAT) sensor.

2. Remove the MAF/IAT sensor screws (1).
3. Remove the MAF/IAT sensor (2).

Installation Procedure

1. Install the MAF/IAT sensor (2).

Notice: Refer to Fastener Notice.

2. Install the MAF/IAT sensor screws (1).

Tighten the screws to 0.6 N.m (5 lb in).

3. Connect the engine wiring harness electrical connector (1) to the MAF/IAT sensor.