Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Scan Tool Data Definitions
Scan Tool Data Definitions
Battery 1
- The scan tool displays 0-20 Volts. The scan tool displays the voltage as received on the battery positive voltage circuit of the BCM.
Generator F-Terminal (PCM)
- The scan tool displays the percentage of the field current.
Generator L-Terminal (ECM)
- The scan tool displays Enabled/Disabled. The scan tool displays Disabled until the engine is running, then the ECM supplies then the percentage value varies depending on electrical loads.
Generator L-Terminal (PCM)
- The scan tool displays Active/Inactive. The scan tool displays Inactive until the engine is running, then the PCM supplies then the percentage value varies depending on electrical loads.
Ignition 1 (ECM/PCM)
- The scan tool displays 0-20 Volts. The scan tool displays the voltage as received on the Ignition 1 circuit to the ECM/PCM.
Transmission Range (ECM)
- The scan tool displays Reverse, 2nd, Drive, Park, Neutral, 1st and 3rd. The scan tool displays the switch status of the transmission (L61).
TR Sw. (PCM)
- The scan tool displays Invalid, Park, Reverse, Neutral, Drive, Intermediate and Low The scan tool displays the switch status or the transmission (L66).