Clutch Pressure Control Solenoid Manifold Installation

Clutch Pressure Control Solenoid Manifold Installation




1. Install two 8 x 14 mm clutch pressure control (CPC) solenoid manifold locating pins (83) into the transmission case (31).
2. Install the CPC solenoid manifold gasket (82).





Notice: Refer to Fastener Notice in Service Precautions.

3. Install the CPC solenoid manifold (84).
Install the seven M6 x 1.0 x 35 mm CPC solenoid manifold bolts (85).

Tighten the bolts to 12 N.m (106 lb in) in the sequence shown.