Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Regulator Valve Body Removal
Regulator Valve Body Removal
1. Remove the regulator valve body assembly (430) bolts (411), (412), (413) and (414).
2. Remove the stator shaft stop pin (405).
3. Remove the 2 regulator spacer plate locating pins (401).
4. Remove the stator shaft and torque arm assembly (431).
Important: When the spacer plate (400) is removed the oil cooler check ball return spring (227) and the oil cooler check ball (228) will fall out of the control valve body assembly.
5. Remove the spacer plate (400).
6. Remove the stator shaft O-ring seal (406) from the stator shaft (404). Replace the stator shaft O-ring seal when assembling the transmission.