Front Side Door Window Belt Outer Sealing Strip Replacement
Front Side Door Window Belt Outer Sealing Strip Replacement
Removal Procedure
1. Remove the belt seal retaining screw at the rear edge of the door.
2. Remove the outside rearview mirror.
3. Remove the outer belt seal by lifting up on the seal starting at the rear and working forward.
Installation Procedure
1. Align the outer belt seal fastener location with the hole in the door structure and outer panel retaining tabs.
2. Starting at the rear of the belt seal, push the belt seal down onto the flange until fully seated.
3. Install the outside rearview mirror.
Notice: Refer to Fastener Notice.
4. Install the outer belt seal retaining screw.
Tighten the screw to 2 N.m (18 lb in).