Rear Side Door Window Channel Replacement 2

Rear Side Door Window Channel Replacement

Removal Procedure

1. Remove the rear door window.
2. Remove the rear door applique.
3. Remove the rear door window weatherstrip run channel assembly.
4. Remove the rear door outer panel.
5. Remove the rear door sound insulator.




6. Remove the rear door window run channel and fixed glass assembly.

* Remove the lower bolt from the fixed glass post.
* Disengage the fixed glass post upper clip from the door frame by using a small screwdriver to press up on the clip.
* Depress the mushroom retainers at the top ends of the metal glass run channels.
* Remove the seal leg from the front metal glass run channel.
* Starting from the front corner of the door, remove the seal from the door header flange.
* Remove the seal and fixed glass assembly from the door.

Installation Procedure




1. Install the window run channel seal and fixed glass assembly.

* Place the seal and fixed glass assembly into the door frame.
* Place the seal assembly on the door header.
* Install the fixed glass post upper clip to the door frame.
* Install the front seal leg to the metal glass run channel.
* Secure the mushroom retainers at the top ends of the metal glass run channels.
* Install the seal to the door header flange, starting from the front corner.

Notice: Refer to Fastener Notice.

* Install the lower fixed glass post bolt.

Tighten the bolt to 10 N.m (89 lb in).

2. Install the rear door sound insulator.
3. Install the rear door outer panel.
4. Install the rear door window weatherstrip run channel assembly.
5. Install the rear door applique.
6. Install the rear door window.