Air Cleaner Housing: Service and Repair

Air Cleaner Assembly Replacement

Removal Procedure




1. Loosen the clamp at the air cleaner assembly.
2. Disconnect the intake air temperature (IAT) 1 sensor connector.




3. Remove the air cleaner assembly top cover and filter element.




4. Remove the air cleaner assembly bolt.
5. Remove the air cleaner assembly.

Installation Procedure




1. Install the air cleaner assembly into position, aligning locking pins into the front panel.

Notice: Refer to Fastener Notice.

2. Install the air cleaner attachment bolt.

Tighten the bolt to 10 N.m (89 lb in).




3. Install the filter element and air cleaner assembly top cover.




4. Tighten the clamp at the air cleaner assembly.

Tighten the clamp to 4 N.m (35 lb in).

5. Connect the IAT 1 sensor connector.