Seat Adjuster Motor Replacement - Horizontal

Seat Adjuster Motor Replacement - Horizontal

Removal Procedure

Caution: Refer to SIR Caution (SIR Caution).
1. Remove the front seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).




2. Remove the seat adjuster motor cables by pulling the cables out of the adjuster.




3. Disconnect the electrical connectors.




4. Remove the fasteners from the seat adjuster motor.
5. Remove the seat adjuster motor.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice).

1. Install the seat adjuster motor.

Tighten the fastener to 3 N.m (26.5 lb in).





2. Connect the electrical connectors.




3. Install the seat adjuster motor cables by pushing the cables into the adjuster.
4. Install the front seat. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
5. Verify that both tracks operate correctly.