Exhaust Manifold Heat Shield Replacement - Right Side

Exhaust Manifold Heat Shield Replacement - Right Side (LZ4 - Gas, 6 Cyl, 3.5L, SFI, V6, Offset Bore)

Removal Procedure
Caution: Refer to Exhaust Service Caution (Service Precautions).
Caution: Refer to Protective Goggles and Glove Caution (Protective Goggles and Glove Warning).





1. Remove the bank 1 sensor 1 heated oxygen sensor (HO2S). Refer to Heated Oxygen Sensor Replacement - Bank 1 Sensor 1 (Service and Repair).
2. Remove the exhaust manifold heat shield bolts.
3. Remove the exhaust manifold heat shield.



Installation Procedure





1. Install the exhaust manifold heat shield.

Notice: Refer to Fastener Notice (Fastener Notice).

2. Install the exhaust manifold heat shield bolts.

Tighten the bolts to 10 N.m (89 lb in).

3. Install the bank 1 sensor 1 HO2S. Refer to Heated Oxygen Sensor Replacement - Bank 1 Sensor 1 (Service and Repair).