Inflatable Restraint Side Impact Module Wiring Harness Replacement

Inflatable Restraint Side Impact Module Wiring Harness Replacement

Removal Procedure

Caution: Refer to SIR Inflator Module Handling and Storage Caution (SIR Inflator Module Handling and Storage Caution).
Caution: Refer to SIR Caution (SIR Caution).
1. Disable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).





Important: Removal of the right or the left inflatable restraint side impact module wiring harness uses the same procedure.


2. Remove the inflatable restraint side impact module from the seat. Refer to Inflatable Restraint Side Impact Module Replacement - Front (Service and Repair).
With the seat back panel removed, the inflatable restraint side impact module wiring harness (1) will be exposed.
3. Remove the clips that fasten the side impact module wiring harness (1) to the seat.



Installation Procedure





1. Install the new side impact module wiring harness (1) to the seat.
2. Install the retaining clips that fasten the side impact module wiring harness (1) to the seat.
3. Install the side impact module to the seat. Refer to Inflatable Restraint Side Impact Module Replacement - Front (Service and Repair).
4. Enable the SIR system. Refer to SIR Disabling and Enabling (Service and Repair).