Electronic Brake Control Module: Testing and Inspection

Electronic Brake Control Module Programming and Setup

EBCM Replacement

If the electronic brake control module (EBCM) is replaced, the following procedures must be performed:


EBCM Reprogramming-Refer to Service Programming System (SPS) (Programming and Relearning) .


EBCM Reprogramming

If the EBCM needs to be reprogrammed, Refer to Service Programming System (SPS) (Programming and Relearning) .


Setup for Component Replacement

The replacement of ABS components such as the steering wheel position sensor may require a setup procedure for complete repair . Refer to Steering Angle Sensor Centering (Service and Repair)