Backup Lamp Switch: Service and Repair

Backup Lamp Switch Replacement

Removal Procedure





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .
2. Disconnect the backup lamp switch electrical connector (1).




3. Remove the backup lamp switch from the transaxle.



Installation Procedure






Notice: Refer to Fastener Notice (Fastener Notice) .

1. Install the backup lamp switch.

Tighten the switch to 18 N.m (13 lb ft).





2. Connect the backup lamp switch electrical connector (1).
3. Lower the vehicle.