Oil Level Indicator and Tube Replacement (LAT-2.4L 2.4L HYBR)

Oil Level Indicator and Tube Replacement (LAT-2.4L)

Removal Procedure





1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement) .
2. Remove the oil level indicator.
3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair) .




4. Remove the engine wiring harness clip (3) from the oil level indicator tube bracket.




5. Remove the knock sensor electrical connector lead (4) from the oil level indicator tube bracket.
6. Lower the vehicle.




7. Remove the oil level indicator tube bolt.
8. Remove the oil level indicator tube.
9. Remove the oil level indicator tube O-ring seals, if necessary.



Installation Procedure





1. Install NEW oil level indicator tube O-ring seals, if necessary.
2. Install the oil level indicator tube.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the oil level indicator tube bolt.

Tighten the bolt to 10 N.m (89 lb in).

4. Raise and support the vehicle.




5. Install the knock sensor electrical connector lead (4) to the oil level indicator tube bracket.




6. Install the engine wiring harness clip (3) to the oil level indicator tube bracket.
7. Lower the vehicle.




8. Install the oil level indicator.
9. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Air Cleaner Outlet Duct Replacement) .