Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Torque Converter Installation
Torque Converter Installation
Tools Required
J 21366 Torque Converter Holding Strap
1. Install a new turbine shaft O-ring (41) on the end of the turbine shaft.
Caution: The torque converter weighs approximately 65 lbs. Personal injury may result if you lift the torque converter improperly.
2. Install the torque converter onto the transmission.
3. Install theJ 21366 .
4. Remove the transmission from the holding fixture.