Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2008 >> VUE FWD V6-3.6L >> Repair and Diagnosis >> Heating and Air Conditioning >> Housing Assembly HVAC >> Service and Repair >> Blower Case Assembly Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Blower Case Assembly Replacement



Blower Case Assembly Replacement

Removal Procedure

1. Remove the HVAC module assembly. Refer to HVAC Module Assembly Replacement (HVAC Module Assembly Replacement) .
2. Remove the evaporator case assembly. Refer to Air Conditioning (A/C) Evaporator Case Assembly Replacement (Service and Repair) .
3. Remove the air inlet assembly. Refer to Air Inlet Assembly Replacement (Air Inlet Assembly Replacement) .




4. Remove the blower motor screws from the blower case assembly.
5. Remove the blower motor from the blower case assembly.




6. Remove the blower motor control module screws from the blower case assembly.
7. Remove the blower motor control module from the blower case assembly.




8. Remove the screws retaining the two halves of the blower case assembly.
9. Separate the two halves of the blower case assembly.
10. Remove the evaporator core from the blower case assembly.



Installation Procedure





1. Install the evaporator core to the blower case assembly.
2. Assemble the two halves of the blower case assembly.

Notice: Refer to Fastener Notice (Fastener Notice) .

3. Install the screws to retain the two halves of the blower case assembly.

Tighten the screws to 1.5 N.m (13 lb in).





4. Install the blower motor control module to the blower case assembly.
5. Install the blower motor control module screws to the blower case assembly.

Tighten the screws to 1.5 N.m (13 lb in).





6. Install the blower motor to the blower case assembly.
7. Install the blower motor screws to the blower case assembly.

Tighten the screws to 1.5 N.m (13 lb in).

8. Install the air inlet assembly. Refer to Air Inlet Assembly Replacement (Air Inlet Assembly Replacement) .
9. Install the evaporator case assembly. Refer to Air Conditioning (A/C) Evaporator Case Assembly Replacement (Service and Repair) .
10. Install the HVAC module. Refer to HVAC Module Assembly Replacement (HVAC Module Assembly Replacement) .


pro multis · About Operation CHARM