Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust
Camshaft Position Sensor Replacement - Bank 2 (Left Side) Exhaust
Removal Procedure
1. Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (Service and Repair) .
2. Disconnect the engine wiring harness electrical connector (3) from the bank 2 exhaust camshaft position (CMP) sensor (6).
3. Remove the CMP sensor bolt.
4. Remove the CMP sensor.
Installation Procedure
1. Install the CMP sensor.
Notice: Refer to Fastener Notice (Fastener Notice) .
2. Install the CMP sensor bolt.
Tighten the bolt to 10 N.m (89 lb in).
3. Connect the engine wiring harness electrical connector (3) to the bank 2 exhaust CMP sensor (6).
4. Install the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (Service and Repair) .