Operation CHARM: Car repair manuals for everyone.
Home >> Saturn >> 2009 >> VUE AWD V6-3.6L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Camshaft Position Sensor >> Service and Repair >> Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake




Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake

Removal Procedure




1. Remove the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (Service and Repair).
2. Disconnect the engine wiring harness electrical connector (1) from the bank 2 intake camshaft position (CMP) sensor (8).




3. Remove the CMP sensor bolt.
4. Remove the CMP sensor.

Installation Procedure




1. Install the CMP sensor.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the CMP sensor bolt. Tighten the bolt to 10 Nm (89 lb in).




3. Connect the engine wiring harness electrical connector (1) to the bank 2 intake CMP sensor (8).
4. Install the engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side (Service and Repair).

pro multis · About Operation CHARM