Removal and Installation
REMOVALHINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
2. REMOVE RADIATOR GRILLE
3. REMOVE FRONT SPOILER PAD LH
4. REMOVE FRONT SPOILER PAD RH
5. REMOVE FRONT BUMPER COVER
6. REMOVE HEADLIGHT ASSEMBLY LH
a. Remove the 4 screws.
b. Disconnect the connectors.
c. Remove the headlight.
INSTALLATION
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
1. INSTALL HEADLIGHT ASSEMBLY LH
a. Install the headlight with the 4 screws.
b. Connect the connectors.
2. INSTALL FRONT BUMPER COVER
3. INSTALL FRONT SPOILER PAD LH
4. INSTALL FRONT SPOILER PAD RH
5. INSTALL RADIATOR GRILLE
6. INSTALL HEADLIGHT ASSEMBLY
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.