Component Tests and General Diagnostics

TIRE AND WHEEL: TIRE AND WHEEL SYSTEM: INSPECTION

INSPECTION

1. INSPECT TIRES
(a) Check the tires for wear and proper inflation pressure.
Cold tire inflation pressure:










(b) Using a dial indicator, check the runout of the tires.
Tire runout:
1.4 mm (0.055 in.) or less
2. ROTATE TIRES
HINT: Rotate the tires as shown in illustration.





3. INSPECT WHEEL BALANCE






(a) Check and perform off-car balancing.
(b) If required, perform on-car balancing.
Imbalance after adjustment:
8.0 g (0.018 lb.) or less
4. INSPECT FRONT AXLE HUB BEARING
HINT: Front Axle Hub

5. INSPECT REAR AXLE HUB BEARING
HINT: Rear Axle Hub