Operation CHARM: Car repair manuals for everyone.
Home >> Scion >> 2010 >> tC L4-2.4L (2AZ-FE) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair >> Removal
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removal





2AZ-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT FENDER APRON SEAL RH Removal

3. REMOVE FAN AND GENERATOR V BELT Removal

4. REMOVE GENERATOR ASSEMBLY Removal

5. REMOVE CRANKSHAFT POSITION SENSOR





(a) Disconnect the sensor connector.

(b) Remove the connector clamp.

(c) Remove the wire harness from the wire harness clamp bracket.

(d) Remove the wire harness clamp.

(e) Remove the bolt and sensor.
pro multis · About Operation CHARM