Pinout Values and Diagnostic Parameters

DOOR LOCK: WIRELESS DOOR LOCK CONTROL SYSTEM: TERMINALS OF ECU

1. CHECK MAIN BODY ECU AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY

Text in Illustration

(a) Remove the main body ECU.

(b) Disconnect the D42 main body ECU connector.

(c) Measure the voltage and resistance according to the value(s) in the table below.

HINT
Measure the values on the wire harness side with the connector disconnected.

If the result is not as specified, there may be a malfunction on the wire harness side.

(d) Reconnect the main body ECU connector.

(e) Reinstall the main body ECU.

(f) Measure the voltage according to the value(s) in the table below.

If the result is not as specified, the main body ECU may have a malfunction.