Installation

BRAKE (REAR): REAR BRAKE: INSTALLATION

HINT
* Use the same procedure for the LH side and RH side.
* The following procedure listed is for the LH side.

1. INSTALL REAR BRAKE DRUM

2. ADJUST REAR DRUM BRAKE SHOE CLEARANCE

(a) Temporarily install the 2 wheel nuts.

(b) Remove the shoe adjusting hole plug, and turn the adjuster to expand the shoe until the drum locks.





Text in Illustration





(c) Hold the automatic adjust lever away from the adjuster, and contract the brake shoe by turning the adjust bolt using another screwdriver until the drum can rotate smoothly.





Text in Illustration





Standard:

11 notches

(d) Install the hole plug.

3. BLEED BRAKE LINE

Service and Repair

4. INSTALL REAR WHEEL

Torque : 103 Nm (1050 kgf-cm, 76 ft-lbf)

5. TEMPORARILY TIGHTEN ADJUSTING NUT

(a) Temporarily install the adjusting nut and the lock nut to the No. 1 parking brake cable assembly.

6. ADJUST PARKING BRAKE LEVER TRAVEL Adjustments

7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY Installation