Initialization

METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: INITIALIZATION

1. OIL MAINTENANCE INFORMATION MODE RESET OPERATION (for U. S. A.)

NOTICE:
* If the oil change reminder light is on, change the engine oil and then perform this procedure.
* To prevent the oil change reminder light from coming on after changing the engine oil, perform this procedure.

HINT
The trip meter reset knob is located on the lower left side of the combination meter assembly.

(a) Turn the ignition switch to ON.

(b) Press the trip meter reset knob until the odometer displays "TRIP A".

(c) Turn the ignition switch off.

(d) Turn the ignition switch to ON while pressing and holding the trip meter reset knob. The LCD counts down by the dashes for 5 seconds as shown in the illustration to complete the reset procedure.





(e) Release the trip meter reset knob.

(f) After the reset procedure is complete, the LCD displays "000000" for 1 second. The LCD displays the odometer.

HINT
If the oil change reminder light is on before performing this reset procedure, the reminder light turns off at this point.

(g) Turn the ignition switch off.